Search:
Submit Search


Wind supply model preferences

Using the CODM to create your own organ definitions, exchange CODM organ definitions, ...

Wind supply model preferences

Postby tf11972 » Wed Aug 02, 2017 4:27 pm

On creating our sampleset, we have the issue that there is a "pumping" effect, when we are playing with most of the stops pulled out. It sounds like the wind pressure is going down temporarily.
Disabling the wind supply model solves this issue, but the sound becomes slightly static.
In the CODM it's possible to modify the size of the windchests. Does this help? Or what else preferences in the CODM you recommend to get a stable, but vital sound?

Thanks in advance for your help.
Best regards
Thomas

www.forestpipes.de
User avatar
tf11972
Member
 
Posts: 126
Joined: Tue Jan 14, 2014 5:33 pm
Location: Bavaria, Germany

Re: Wind supply model preferences

Postby mdyde » Thu Aug 03, 2017 4:43 am

Hello Thomas,

Yes -- the values of the CODM Division.WindModel_... attributes indirectly determine the magnitude, frequency and damping of the oscillations that are likely as pressures fluctuate. If you haven't done so already, I'd suggest having a thorough read of the descriptions of those attributes in the CODM user's guide -- they describe exactly the effects that each parameter would be expected to have, including formulae.

For example, increasing WindModel_ResrvrBellowsPositiveDampingCoeff will make oscillations die away faster.
Best regards,
Martin.

[Please use email or the Contact page if you need to contact us privately, rather than private forum messages.]

Image
User avatar
mdyde
Moderator
 
Posts: 10123
Joined: Fri Mar 14, 2003 2:19 pm
Location: UK

Re: Wind supply model preferences

Postby tf11972 » Thu Aug 03, 2017 4:46 am

Thanks a lot for your quick reply, Martin.

I will discuss this with Chris.
Best regards
Thomas

www.forestpipes.de
User avatar
tf11972
Member
 
Posts: 126
Joined: Tue Jan 14, 2014 5:33 pm
Location: Bavaria, Germany

Re: Wind supply model preferences

Postby mdyde » Thu Aug 03, 2017 5:10 am

Thanks, Thomas.
Best regards,
Martin.

[Please use email or the Contact page if you need to contact us privately, rather than private forum messages.]

Image
User avatar
mdyde
Moderator
 
Posts: 10123
Joined: Fri Mar 14, 2003 2:19 pm
Location: UK

Re: Wind supply model preferences

Postby chr.schmitz » Thu Aug 03, 2017 1:14 pm

I have the actual measures of the original organ reservoirs. There are 2 reservoirs for 5 divisions.

Should I calculate volumes of reservoirs and sizes of reservoir tables, sum these values for both reservoirs and use them for all 5 divisions?

Chris
User avatar
chr.schmitz
Member
 
Posts: 167
Joined: Mon Aug 26, 2013 12:49 am

Re: Wind supply model preferences

Postby mdyde » Thu Aug 03, 2017 1:32 pm

Hello Chris,

The CODM uses a separate reservoir/regulator for each division (although that doesn't necessarily apply in the full ODF format).

Within the CODM: assuming each of the real organ's two reservoirs is used for some pipes on each division (e.g. flues and reeds) then I would be inclined to start by summing their sizes and volumes, then splitting that sum into five according to the approximate proportions of the total number of ranks that are allocated to each division. However, you will probably still find you need to tweak the values a bit to get fluctuation/oscillatory characteristics that approximate those observed from the real organ.
Best regards,
Martin.

[Please use email or the Contact page if you need to contact us privately, rather than private forum messages.]

Image
User avatar
mdyde
Moderator
 
Posts: 10123
Joined: Fri Mar 14, 2003 2:19 pm
Location: UK


Return to Custom Organ Design Module (CODM)

Who is online

Users browsing this forum: No registered users and 2 guests