Submit Search

Pedal Divide

Using the CODM to create your own organ definitions, exchange CODM organ definitions, ...

Pedal Divide

Postby mmayse » Thu Dec 22, 2016 7:32 pm

Has anyone used the CODM to create a Pedal Divide? Usually what that does is play the pedal stops on keys 1-12 and the couplers engaged on keys 13-32.

Is this possible? Thanks!

Posts: 13
Joined: Thu Jun 12, 2014 11:37 am
Location: Lawrence, Kansas USA

Re: Pedal Divide

Postby mdyde » Fri Dec 23, 2016 6:24 am

Hello Max,

You would probably need to create some extra 'internal' (non-displayed, not allowing direct MIDI input/output) divisions with the appropriate compasses, coupled to the displayed/playable divisions.
Best regards,

[Please use email or the Contact page if you need to contact us privately, rather than private forum messages.]

User avatar
Posts: 10175
Joined: Fri Mar 14, 2003 2:19 pm
Location: UK

Re: Pedal Divide

Postby organsRgreat » Wed Jan 18, 2017 1:40 pm

My reply seems to have been one of the messages that was lost during the forum's recent problems, so I'll repeat it for information. If you just want to use one of the manual divisions on the upper part of the pedalboard, this can be done via Organ Settings > Keyboards.

If for instance you want the bottom octave of the pedalboard to operate pedal stops in the normal way, go to Pedals in the left hand column, then on the Primary Input tab set the MIDI note range to 036 (lowest) to 048 (highest), and MIDI channel to your usual pedal channel. Then go to the Input 2 tab , and set the MIDI note range to 049 (lowest) to 067 (highest), and the MIDI channel to that of the manual whose stops you want to play on the pedals.

If you want to divide the pedals at a different point, just alter 048 on the Primary Input and 049 on Input 2 accordingly.

The Organ Keyboards menu allows a total of 4 inputs, so you could have a up to 3 manuals permanently coupled to part of the pedalboard if you wish.
Posts: 269
Joined: Fri Nov 16, 2012 6:30 am
Location: England

Return to Custom Organ Design Module (CODM)

Who is online

Users browsing this forum: No registered users and 1 guest