PCF wrote:Hello Martin, yes, your understanding is correct.
Thanks, Pharny.
Really the CODM isn't currently designed to handle that (it's designed to be fairly easy/quick to learn and use and sufficient for common/conventional organ features), but, I think you could probably do what you want as follows (the only exception being that you would need the switch that controls the dividing to operate inverted, e.g. being named 'Pedal Divide Off'):
- Division 1 would be the full-compass pedalboard, as normal, but none of the Pedal division's stops or couplers would be attached to it.
- Division 8 would be for the stops for the lower portion of the Pedal division (as defined by Division.MIDINoteNumOfFirstKey and Division.NumberOfKeys). The Stop objects would be displayed and MIDI-accessible as normal.
- Division 9 would be for stops for the upper portion of the Pedal division (as defined by Division.MIDINoteNumOfFirstKey and Division.NumberOfKeys). The Stop objects would be non-displayed and non MIDI-accessible, and they would copy their states from their equivalents from division 8.
- Division 10 would be for the couplers for the lower portion of the Pedal division (as defined by Division.MIDINoteNumOfFirstKey and Division.NumberOfKeys). The Coupler objects would be displayed and MIDI-accessible as normal.
- Division 11 would be for couplers for the upper portion of the Pedal division (as defined by Division.MIDINoteNumOfFirstKey and Division.NumberOfKeys). The Coupler objects would be non-displayed and non MIDI-accessible, and they would copy their states from their equivalents from division 10.
- Create a non-displayed, non MIDI-accessible coupler with source=division 1, destination=division 8, full compass, that defaults to engaged (i.e. is always on).
- Create a non-displayed, non MIDI-accessible coupler with source=division 1, destination=division 11, full compass, that defaults to engaged (i.e. is always on).
- Create a displayed, MIDI-accessible coupler with source=division 1, destination=division 9, full compass, named (e.g.) 'Pedal Divide Off'.
- Create a non-displayed, non MIDI-accessible coupler with source=division 1, destination=division 10, full compass, that copies its state from the displayed 'Pedal Divide Off' coupler.
I hope that helps. (I'll have to leave you to your own devices if you do want to try it, I'm afraid.)
Best regards, Martin.
Hauptwerk software designer/developer, Milan Digital Audio.