Submit Search

One Function Connected to 2 Controls

Using the CODM to create your own organ definitions, exchange CODM organ definitions, ...

One Function Connected to 2 Controls

Postby chr.schmitz » Thu Mar 02, 2017 5:00 am

Is it possible to connect one stop or coupler with two different controls on a single page? Both controls should be able to engage / disengage the stop / coupler. The other control should switch its stage accordingly.

Thanks in advance for any advice!

Best, Chris
User avatar
Posts: 306
Joined: Mon Aug 26, 2013 12:49 am

Re: One Function Connected to 2 Controls

Postby organsRgreat » Thu Mar 02, 2017 7:05 am

I don't think you need the CODM to do this. Auto-detect (right click) the first control you want, accept, then auto-detect the second. At that point Hauptwerk will put up a message asking whether you really want both controls to affect the same stop / coupler, and will show you alternatives. Just accept “both controls” :-)
Posts: 363
Joined: Fri Nov 16, 2012 6:30 am
Location: England

Re: One Function Connected to 2 Controls

Postby mdyde » Thu Mar 02, 2017 7:35 am

Hello Chris,

Within the CODM specifically:

Any given control (stop/coupler/piston/etc.) can be displayed in up to two places (via the CustomDisplayN_... attributes), even on the same display page.

The only other things that might possibly be applicable would be ShortcutPiston objects.

(Arbitrary switches and linkages aren't possible within the CODM.)
Best regards,

[Please use email or the Contact page if you need to contact us privately, rather than private forum messages.]

User avatar
Posts: 10644
Joined: Fri Mar 14, 2003 2:19 pm
Location: UK

Return to Custom Organ Design Module (CODM)

Who is online

Users browsing this forum: No registered users and 1 guest