Search:
Submit Search


One Function Connected to 2 Controls

Using the CODM to create your own organ definitions, exchange CODM organ definitions, ...

One Function Connected to 2 Controls

Postby chr.schmitz » Thu Mar 02, 2017 5:00 am

Is it possible to connect one stop or coupler with two different controls on a single page? Both controls should be able to engage / disengage the stop / coupler. The other control should switch its stage accordingly.

Thanks in advance for any advice!

Best, Chris
User avatar
chr.schmitz
Member
 
Posts: 171
Joined: Mon Aug 26, 2013 12:49 am

Re: One Function Connected to 2 Controls

Postby organsRgreat » Thu Mar 02, 2017 7:05 am

I don't think you need the CODM to do this. Auto-detect (right click) the first control you want, accept, then auto-detect the second. At that point Hauptwerk will put up a message asking whether you really want both controls to affect the same stop / coupler, and will show you alternatives. Just accept “both controls” :-)
organsRgreat
Member
 
Posts: 269
Joined: Fri Nov 16, 2012 6:30 am
Location: England

Re: One Function Connected to 2 Controls

Postby mdyde » Thu Mar 02, 2017 7:35 am

Hello Chris,

Within the CODM specifically:

Any given control (stop/coupler/piston/etc.) can be displayed in up to two places (via the CustomDisplayN_... attributes), even on the same display page.

The only other things that might possibly be applicable would be ShortcutPiston objects.

(Arbitrary switches and linkages aren't possible within the CODM.)
Best regards,
Martin.

[Please use email or the Contact page if you need to contact us privately, rather than private forum messages.]

Image
User avatar
mdyde
Moderator
 
Posts: 10177
Joined: Fri Mar 14, 2003 2:19 pm
Location: UK


Return to Custom Organ Design Module (CODM)

Who is online

Users browsing this forum: No registered users and 1 guest