It is currently Thu Mar 28, 2024 4:05 am


Wind model decreases division volume

Using the CODM to create your own organ definitions, exchange CODM organ definitions, ...
  • Author
  • Message
Offline
User avatar

tf11972

Member

  • Posts: 338
  • Joined: Tue Jan 14, 2014 4:33 pm
  • Location: Bavaria, Germany

Wind model decreases division volume

PostSun Sep 16, 2018 3:35 am

In my developing organ I have the following problem:

When I play tutti and press a pedal key, the volume of the manuals decreases. After releasing the pedal key, the manuals become louder. I have tried to increase the volume of the bellows, but this shows no effect. Only decreasing the wind model to 50 percent or turning off makes this effect disappear.

Which parameter of the wind model do I have to modify to get a stable wind supply?

Thanks in advance and best regards.
Thomas
Best regards
Thomas

Forestpipes - Virtual Pipe Organs
https://forestpipes.de
Offline
User avatar

tf11972

Member

  • Posts: 338
  • Joined: Tue Jan 14, 2014 4:33 pm
  • Location: Bavaria, Germany

Re: Wind model decreases division volume

PostSun Oct 07, 2018 9:31 am

I have the following parameters in the 4 divisions:

<WindModel_TotalResrvrAndWndchstVolMetresCubed>5</WindModel_TotalResrvrAndWndchstVolMetresCubed>
<WindModel_AreaOfReservoirTableMetresSquared>3</WindModel_AreaOfReservoirTableMetresSquared>
<WindModel_ResrvrBellowsPositiveDampingCoeff>20</WindModel_ResrvrBellowsPositiveDampingCoeff>
<WindModel_WindchestPressureDropPctAtMaxLoad>2</WindModel_WindchestPressureDropPctAtMaxLoad>

The effect only occurs, when I have engaged the pedal couplers. I have also set the wind model effect in the ranks to zero, but that doesn't help.

Does anyone have an idea?

Thanks in advance.
Best regards
Thomas

Forestpipes - Virtual Pipe Organs
https://forestpipes.de
Offline
User avatar

engrssc

Member

  • Posts: 7283
  • Joined: Mon Aug 22, 2005 10:12 pm
  • Location: Roscoe, IL, USA

Re: Wind model decreases division volume

PostSun Oct 07, 2018 3:29 pm

Does the issue occur with the wind model totally disabled?

Rgds,
Ed
Offline
User avatar

tf11972

Member

  • Posts: 338
  • Joined: Tue Jan 14, 2014 4:33 pm
  • Location: Bavaria, Germany

Re: Wind model decreases division volume

PostSun Oct 07, 2018 3:45 pm

No, it doesn't.
Best regards
Thomas

Forestpipes - Virtual Pipe Organs
https://forestpipes.de

Return to Custom Organ Design Module (CODM)

Who is online

Users browsing this forum: No registered users and 5 guests