Search:
Submit Search


Moving solenoids

Building organ consoles for use with Hauptwerk, adding MIDI to existing consoles, obtaining parts, ...

Moving solenoids

Postby maestropotvin » Sat Apr 15, 2017 4:34 pm

Hello all,

I am looking at being able to have Hauptwerk move the solenoid drawknobs on my console.

All the wires are OK, the MIDI channels are set properly.
I am using MIDI-Hardware MIDECO & MIBO
The drawknobs are Kimber-Allen

In theory it should work, but apparently I am missing a setting about using echo in Hauptwerk. I can't find it.

I hope someone can provide some guidance.

Thank you,

Stephane
maestropotvin
Member
 
Posts: 63
Joined: Tue Jul 30, 2013 9:18 am

Re: Moving solenoids

Postby pkuzan » Sun Apr 16, 2017 3:17 am

Make sure you have set Console MIDI out for your MIDECO in General Settings, MIDI Ports. Then when you auto-detect your drawstops you'll get the option to sent matching MIDI.
pkuzan
Member
 
Posts: 73
Joined: Sun Aug 22, 2010 4:01 pm
Location: Romsey, Hampshire

Re: Moving solenoids

Postby maestropotvin » Tue Apr 18, 2017 11:59 pm

Thank you Paul for your help.
maestropotvin
Member
 
Posts: 63
Joined: Tue Jul 30, 2013 9:18 am

Re: Moving solenoids

Postby organtechnology » Wed Apr 19, 2017 11:12 pm

maestropotvin wrote:Hello all,

I am looking at being able to have Hauptwerk move the solenoid drawknobs on my console.

All the wires are OK, the MIDI channels are set properly.
I am using MIDI-Hardware MIDECO & MIBO
The drawknobs are Kimber-Allen

In theory it should work, but apparently I am missing a setting about using echo in Hauptwerk. I can't find it.

I hope someone can provide some guidance.

Thank you,

Stephane


I assume you have a power supply hooked to the solenoids?
Complete VPO systems powered by Hauptwerk™. Real Wood Consoles, PC or MAC Computer Sound Modules, Audio for Home or Church.
info (at) organtechnology.com http://www.organtechnology.com

Authorized Hauptwerk Dealer; Milan Digital Audio Dealer..
User avatar
organtechnology
Member
 
Posts: 1609
Joined: Sun Aug 02, 2009 5:58 pm
Location: DFW, TX USA

Re: Moving solenoids

Postby maestropotvin » Wed Apr 19, 2017 11:26 pm

Hi Organtechnology.

Thank you for your reply.

I have discovered that the power supply I had was simply not powerful enough. I have since remedied the situation.

Thank you for kindly helping.

Stephane
maestropotvin
Member
 
Posts: 63
Joined: Tue Jul 30, 2013 9:18 am


Return to DIY organ consoles / MIDI

Who is online

Users browsing this forum: No registered users and 2 guests