Search:
Submit Search


Teensy Audio Power Switch

Building organ consoles for use with Hauptwerk, adding MIDI to existing consoles, obtaining parts, ...

Teensy Audio Power Switch

Postby jkinkennon » Sun May 13, 2018 11:56 am

I will be writing a script to modify my Teensy LCD Project to receive HW Sysex status information, specifically in this case to turn on four power outlets in sequence when HW sends the Organ Ready status. This is simply a new sketch that will work with or without the PCB board shown in the Teensy LCD thread, so no new picture is needed here. The project will use the Teensy 3.6 as that is the model I have in hand, but there's no reason not to do the same with the 3.5 or the 3.2 versions.

Thanks to Ed for a private message that prompted me to do this. I have automated the power to my amps and powered speakers for years in a similar manner using my own encoder designs, but this will allow adding the feature without purchasing an expensive decoder just for that purpose.
jkinkennon
Member
 
Posts: 949
Joined: Thu May 07, 2009 10:43 am
Location: Vancouver, WA

Re: Teensy Audio Power Switch

Postby bryanbierbaum » Tue Jun 12, 2018 11:37 pm

I am eagerly awaiting this! Thanks for your contributions.
bryanbierbaum
Member
 
Posts: 11
Joined: Wed Apr 13, 2016 11:58 am

Re: Teensy Audio Power Switch

Postby jkinkennon » Wed Jun 13, 2018 12:35 pm

With three console projects going I've let this sketch slide a bit. I'll get to it soon as I need it for at least one of my consoles. Soon means within a month at most.
jkinkennon
Member
 
Posts: 949
Joined: Thu May 07, 2009 10:43 am
Location: Vancouver, WA

Re: Teensy Audio Power Switch

Postby engrssc » Wed Jun 13, 2018 5:36 pm

jkinkennon wrote: Soon means within a month at most.


Faster than would be with my schedule. :roll:

Rgds,
Ed
User avatar
engrssc
Member
 
Posts: 5355
Joined: Mon Aug 22, 2005 11:12 pm
Location: Roscoe, IL, USA

Re: Teensy Audio Power Switch

Postby jkinkennon » Thu Jun 14, 2018 10:46 am

Ed, I'll take a look at it today. I can send the unit right way if you want to load the sketch yourself -- do you have Arduino setup with Teensy on your computer? If all goes well I'll send it out programmed today or tomorrow.
jkinkennon
Member
 
Posts: 949
Joined: Thu May 07, 2009 10:43 am
Location: Vancouver, WA


Return to DIY organ consoles / MIDI

Who is online

Users browsing this forum: No registered users and 2 guests