Hi,
I am new on this field please forgive me wrong names and mistakes.
I am building MIDI controllers for Hauptwerk and I face a problem which seems strange for me:
- I have built device with buttons and LEDs, button send MidiOn/Off command when pressed and LED are turned on/off on this same command received.
- I can assign (autodetect) button to any piston and pressing button on my device or pressing at the screen can turn corresponding LED on/off - as it was designed.
- lets select Left Jamb - SWELL, here lets select 3 pistons: Oboe8 Trumpet8 and Clarinet8 and assign external buttons, I assign noteOn/Off to respect pistons 20,21,22 and it works
- then I do combination: set combination of pistons let say all 3 on then SET, "1" and SET, then similar for all off assign to "2", when I press at the screen "1" all pistons are on when i press "2" all are off, but my device do not show identical state by LED!
- I check what Hauptwerk send back and it send only noteOn/Off 22 - corresponding to last (MSB) piston.
- I will expect that if all 3 pistons change state, Hauptwerk will send 3 commands noteOn/Off according to their state but it send only one.
Please help me to solve/understand the problem.
Thank you for your help.
Regards
I am new on this field please forgive me wrong names and mistakes.
I am building MIDI controllers for Hauptwerk and I face a problem which seems strange for me:
- I have built device with buttons and LEDs, button send MidiOn/Off command when pressed and LED are turned on/off on this same command received.
- I can assign (autodetect) button to any piston and pressing button on my device or pressing at the screen can turn corresponding LED on/off - as it was designed.
- lets select Left Jamb - SWELL, here lets select 3 pistons: Oboe8 Trumpet8 and Clarinet8 and assign external buttons, I assign noteOn/Off to respect pistons 20,21,22 and it works
- then I do combination: set combination of pistons let say all 3 on then SET, "1" and SET, then similar for all off assign to "2", when I press at the screen "1" all pistons are on when i press "2" all are off, but my device do not show identical state by LED!
- I check what Hauptwerk send back and it send only noteOn/Off 22 - corresponding to last (MSB) piston.
- I will expect that if all 3 pistons change state, Hauptwerk will send 3 commands noteOn/Off according to their state but it send only one.
Please help me to solve/understand the problem.
Thank you for your help.
Regards