Search:
Submit Search


ARC ROOM CORRECTION

Speakers, amplifiers, headphones, multi-channel audio, reverb units, mixers, wiring, ...

Re: ARC ROOM CORRECTION

Postby David Baldwin » Sun Feb 16, 2014 12:38 pm

My MAudio 1010LT has microphone inputs using two balanced and there is no 48 volt phantom supply.
(Dr.) David G. Baldwin
User avatar
David Baldwin
Member
 
Posts: 238
Joined: Sun Nov 12, 2006 1:08 pm
Location: Ross-on-Wye, Herefordshire, UK

Re: ARC ROOM CORRECTION

Postby pat17 » Sun Feb 16, 2014 1:22 pm

David Baldwin wrote:My MAudio 1010LT has microphone inputs using two balanced and there is no 48 volt phantom supply.


Hello David,

You may try this USB XLR interface - http://www.mxlmics.com/microphones/usb/MicMate-Classic/

Available here for instance - http://www.amazon.co.uk/MXL-Mate-Classi ... ywords=MXL

It provides you everything you need, and you can connect it directly to your computer. :wink:
User avatar
pat17
Member
 
Posts: 1093
Joined: Wed Jan 06, 2010 8:53 am
Location: United Arab Emirates, Dubai

Re: ARC ROOM CORRECTION

Postby Jan Loosman » Mon Mar 03, 2014 5:38 pm

Arc update to Version 2.2. is released.
I hope this update wil fix the save bug for the second instance of Arc, in a multichannel setup.

regards Jan Loosman
Jan Loosman
Member
 
Posts: 241
Joined: Sat Dec 20, 2008 5:33 pm
Location: The Hague, Netherlands

Re: ARC ROOM CORRECTION

Postby Doug S. » Tue Mar 04, 2014 7:03 pm

Any news of a multichannel version?
Doug
User avatar
Doug S.
Member
 
Posts: 312
Joined: Tue May 20, 2008 9:17 pm
Location: Massachusetts USA

Re: ARC ROOM CORRECTION

Postby Jan Loosman » Wed Mar 05, 2014 7:26 am

Hello Doug

In a former post you told that you purchased Arc already. Have you used it in your multichannel setup already or do you encounter problems. You can use multiple instances of Arc but only saving the other channels is suffering from a bug. It is just a few mouseclicks before starting to play to correct this.

Regards Jan
Jan Loosman
Member
 
Posts: 241
Joined: Sat Dec 20, 2008 5:33 pm
Location: The Hague, Netherlands

Re: ARC ROOM CORRECTION

Postby Doug S. » Sun Mar 09, 2014 7:30 pm

Jan,
I have not as yet installed it. I've been spending time experimenting with blending in some of my Ahlborn Archive stops into the pipes / Hauptwerk mix. The Velesovo set blends remarkably with my pipework (Gt. & Pos)
The swell however is stand alone HW and suffers a lack of presence when compared with the hybrid divisions where I use the duplicate HW equivalent stops as shadows to the real pipes. The mixed result is still a wet sound, but a closer listening environment. I'm using the Archive stops as if they were the real pipes in the swell with very pleasing results. The swell now sounds
"closer" and right for the mix.

A question. Does ARC add latency?
Thanks,
Doug
Doug
User avatar
Doug S.
Member
 
Posts: 312
Joined: Tue May 20, 2008 9:17 pm
Location: Massachusetts USA

Re: ARC ROOM CORRECTION

Postby pat17 » Mon Mar 10, 2014 3:33 am

Doug S. wrote:A question. Does ARC add latency?


In my specific case where I'm working under OS X (Mac), Arc 2 has no impact on latency. :wink:
User avatar
pat17
Member
 
Posts: 1093
Joined: Wed Jan 06, 2010 8:53 am
Location: United Arab Emirates, Dubai

Re: ARC ROOM CORRECTION

Postby Jan Loosman » Mon Mar 10, 2014 4:43 am

Hello Doug
I have't experienced any latency increase in my setup but Lauwerk did notice a increase
See former post in this forum. It all depends on your hardware and soundcard you are using
Regards Jan
Jan Loosman
Member
 
Posts: 241
Joined: Sat Dec 20, 2008 5:33 pm
Location: The Hague, Netherlands

Re: ARC ROOM CORRECTION

Postby Jan Loosman » Wed Aug 16, 2017 9:05 am

A new version of Arc is comming soon.

Arc 2.5 has a new MEMS mic. which gives a more precise measurment and as result a better correction of your room.
http://www.ikmultimedia.com/news/?item_id=11087

regards Jan
Jan Loosman
Member
 
Posts: 241
Joined: Sat Dec 20, 2008 5:33 pm
Location: The Hague, Netherlands

Previous

Return to Amplification

Who is online

Users browsing this forum: No registered users and 1 guest