It is currently Mon Jul 06, 2020 12:19 pm


Recording A Specific Rank

Sampling pipe organs and turning them into something you can play in Hauptwerk.
  • Author
  • Message
Offline

Steven85791

Member

  • Posts: 3
  • Joined: Sat Aug 23, 2014 1:39 pm

Recording A Specific Rank

PostSat Aug 23, 2014 2:02 pm

I'm trying to sample an organ at a church that I work at because it's being decommissioned and they're going with an electric organ. Here's my question: if there are 73 pipes in the rank of a stop in the great, how do you record the pipes that are above 8 ft and below 8ft by themselves. It's easy to do it with stops in the swell with couplers and I can play it with 16ft 4ft couplers on the great manual but I can't figure out a way to do it with a stop in the great just having those pipes sound. The specific stop is the Melodia. It's a 2 manual organ. This is the organ
http://www.nycago.org/Organs/Qns/html/StClareRC.html
Your help would be greatly appreciated.

Steven
Offline
User avatar

johnh

Member

  • Posts: 696
  • Joined: Sat Mar 15, 2003 7:51 pm
  • Location: Monterey Bay Area of California

Re: Recording A Specific Rank

PostSat Aug 23, 2014 4:58 pm

Record 1 - 61, put slips of paper under the toes of pipes 50 - 61, turn on the 4' coupler and record 62-73.

---john.
Offline

Steven85791

Member

  • Posts: 3
  • Joined: Sat Aug 23, 2014 1:39 pm

Re: Recording A Specific Rank

PostSat Aug 23, 2014 8:48 pm

I will try that thanks!
Offline
User avatar

johnh

Member

  • Posts: 696
  • Joined: Sat Mar 15, 2003 7:51 pm
  • Location: Monterey Bay Area of California

Re: Recording A Specific Rank

PostSat Aug 23, 2014 8:51 pm

Re-check my math to be sure... :-)

Return to Creating sample sets / recording organs

Who is online

Users browsing this forum: No registered users and 2 guests