I have called Behringer but it seems their "engineers" don't really seem to know their products very well. I originally talked to a rep about the new Uphoria UMC1820 and was told it was not very good and had lots of "nightmares" with Win 10. I use Win 7 so perhaps that wouldn't be a problem. They also said it had 8 analog outputs (yet the back panel picture clearly shows 10 -- after pointing that out they said oh, yeah, that's right). Then spoke to them regarding the FCA 610 as all I am attempting to do is have 10 output channels. So, it appears that the FCA 610 has 8 analog 1-8 and then 2 digital 9-10. Now, my scenario is I would like to put 8 outputs analog to my Behringer 2931A's, and then use 9-10 digital to run to subwoofer. My confusion is with a DAC on 9 and 10 will HW then recognize that there are actually 10 output channels available -- even though some (2) are digital? And, having never seen a DAC how do the digital channels get their signal -- also from the USB connection? So -- in the end I would have 10 outputs -- 8 analog 1-8 to B2031 A's and 2 digital 9-10 running to the sub -- all with the signal getting there thru the USB and all channels 1-10 appearing on the HW audio outputs screen allowing multichannel output throughout? And nothing connecting to computer other than the USB cable as far as audio goes -- I am thinking the DAC connects to the 9-10 out on the back of the 610 and yields 2 RCA L/R to subwoofer. Right or Crazy?
This is probably basic for most of you -- but I am easily confused!!!!!
Thanks if you can clear this up in my electronically handicapped mind.
Tom
This is probably basic for most of you -- but I am easily confused!!!!!
Thanks if you can clear this up in my electronically handicapped mind.
Tom