It is currently Mon Jan 18, 2021 6:08 pm


Sysexe not available for input 2

Connecting Hauptwerk to MIDI organs, sequencers, ...
  • Author
  • Message
Offline

Dave

Member

  • Posts: 25
  • Joined: Thu Dec 03, 2015 7:28 am
  • Location: North Yorkshire, England

Sysexe not available for input 2

PostTue Dec 01, 2020 10:52 am

I note in HW VI that when asigning switches to scoped items that there is a subtle difference between input 1 and input 2
Asigning a sysexe message can be set in input 1 but this option is strangely missing from the drop down in input 2. Is there a reason for this?

As a major issue, this is not since I can map the associations the other way round but there doesn't seem to be any real reason for the option to be missing in input 2

Not a show stopper
Regard
Dave
Offline
User avatar

mdyde

Moderator

  • Posts: 12865
  • Joined: Fri Mar 14, 2003 1:19 pm
  • Location: UK

Re: Sysexe not available for input 2

PostTue Dec 01, 2020 11:51 am

Hello Dave,

It was simply because also including it on the 'Input 2' tab would have added some additional overheads and complexity. Since MIDI stops/switches/buttons/pistons that use sys-ex MIDI implementations are quite rare, it wasn't felt to be justified.
Best regards, Martin.
Hauptwerk software designer/developer, Milan Digital Audio.
Offline

Dave

Member

  • Posts: 25
  • Joined: Thu Dec 03, 2015 7:28 am
  • Location: North Yorkshire, England

Re: Sysexe not available for input 2

PostTue Dec 01, 2020 3:26 pm

As ever thank for the quick response. I understand what you say, though pity I must be one of the few that would use it. Still as I said before I can reverse my mappings to get round it in this case.
Regards
Dave
Offline
User avatar

mdyde

Moderator

  • Posts: 12865
  • Joined: Fri Mar 14, 2003 1:19 pm
  • Location: UK

Re: Sysexe not available for input 2

PostWed Dec 02, 2020 4:36 am

Thanks, Dave.
Best regards, Martin.
Hauptwerk software designer/developer, Milan Digital Audio.

Return to Audio / MIDI interfacing

Who is online

Users browsing this forum: No registered users and 14 guests