Search:
Submit Search


MIDI problems with alt configs 2 & 3

Hauptwerk software technical support only. Please make sure you have read the manual, tutorials and FAQ pages before requesting support.

MIDI problems with alt configs 2 & 3

Postby Rimokatolik » Sun Jun 03, 2018 11:41 am

I have configured different audio output in all 4 HW configurations, and from my program want to control HW, like loading organ and activating stops. Everything works fine with main HW exe and alt config 1. However, alt configs 2 & 3 send MIDI messages about initialization, but when my program sends message to open organ nothing happens. I have tried to change audio output configurations, but nothing helped.

I am using MIDI console in and out ports through loopMIDI to achieve this.

Also, as I have marked in General settings/MIDI ports console MIDI IN and OUT, what is the purpose or difference of selecting General settings/General preferences/MIDI console status output (Advanced use)/MIDI OUT port?
Rimokatolik
Member
 
Posts: 28
Joined: Sat Dec 03, 2016 1:40 am

Re: MIDI problems with alt configs 2 & 3

Postby Rimokatolik » Sun Jun 03, 2018 11:49 am

Sorry, my bad. I just noticed I did not do MIDI key trigger/assignments for alt configs 3 & 4. Probably lost them, as I was doing all of them before. Anyway, sorry for disturbance.
Rimokatolik
Member
 
Posts: 28
Joined: Sat Dec 03, 2016 1:40 am

Re: MIDI problems with alt configs 2 & 3

Postby engrssc » Sun Jun 03, 2018 1:15 pm

Good recovery. We all learn from our own and other's mistakes. :wink: Thanks for sharing.

Rgds,
Ed
User avatar
engrssc
Member
 
Posts: 5354
Joined: Mon Aug 22, 2005 11:12 pm
Location: Roscoe, IL, USA

Re: MIDI problems with alt configs 2 & 3

Postby Rimokatolik » Mon Jun 04, 2018 9:09 am

Can somebody still please answer: what is the purpose or difference of selecting General settings/General preferences/MIDI console status output (Advanced use)/MIDI OUT port and usual console IN OUT in the MIDI ports dialog?

Thank you
Rimokatolik
Member
 
Posts: 28
Joined: Sat Dec 03, 2016 1:40 am

Re: MIDI problems with alt configs 2 & 3

Postby B. Milan » Mon Jun 11, 2018 3:20 pm

Rimokatolik wrote:Can somebody still please answer: what is the purpose or difference of selecting General settings/General preferences/MIDI console status output (Advanced use)/MIDI OUT port and usual console IN OUT in the MIDI ports dialog?

Thank you


This is intended only for use with consoles that have custom MIDI display hardware, normally just leave this set to None. This is not at all the same as the typical MIDI ports settings which is for your keyboards and other controls to connect to Hauptwerk through.
Regards,
Brett Milan
http://www.hauptwerk.com
http://www.milandigitalaudio.com
Send Email

Image

_________________________________
Please use email for contacting us. No private messages please.
User avatar
B. Milan
Site Admin
 
Posts: 4340
Joined: Sat Aug 30, 2003 11:15 am
Location: Tampa, FL. USA


Return to Technical support

Who is online

Users browsing this forum: No registered users and 1 guest