Search:
Submit Search


Registrations

Hauptwerk software technical support only. Please make sure you have read the manual, tutorials and FAQ pages before requesting support.

Registrations

Postby axel971 » Wed Mar 21, 2018 9:24 am

Hi everybody. Is it possible to program the stepper using existing master registrations?
axel971
Member
 
Posts: 10
Joined: Mon Jan 15, 2018 7:37 am

Re: Registrations

Postby mdyde » Wed Mar 21, 2018 10:01 am

Hello Axel,

[Topic moved here.]

If I understand correctly what you're asking, yes -- to transfer a stored registration from a master general to a stepper frame, just make sure that the setter is off, then press the relevant master general so that its stored registration is recalled to the draw-knobs/tabs, then store the current registration (i.e. the states of the draw-knobs/tabs) to the desired stepper frame (with the setter on, so as to store it).
Best regards,
Martin.

[Please use email or the Contact page if you need to contact us privately, rather than private forum messages.]

Image
User avatar
mdyde
Moderator
 
Posts: 10644
Joined: Fri Mar 14, 2003 2:19 pm
Location: UK

Re: Registrations

Postby organtechnology » Wed Mar 21, 2018 10:39 am

Hi,

I find it a bit easier to navigate to the stepper frame first and then recall the master general .
Then push the setter piston and store the recalled combination by pushing the trigger piston for the frame. Then make certain the setter is off.

Best regards,

Thomas

mdyde wrote:Hello Axel,

[Topic moved here.]

If I understand correctly what you're asking, yes -- to transfer a stored registration from a master general to a stepper frame, just make sure that the setter is off, then press the relevant master general so that its stored registration is recalled to the draw-knobs/tabs, then store the current registration (i.e. the states of the draw-knobs/tabs) to the desired stepper frame (with the setter on, so as to store it).
Complete VPO systems powered by Hauptwerk™. Real Wood Consoles, PC or MAC Computer Sound Modules, Audio for Home or Church.
info (at) organtechnology.com http://www.organtechnology.com

Authorized Hauptwerk Dealer; Milan Digital Audio Dealer..
User avatar
organtechnology
Member
 
Posts: 1738
Joined: Sun Aug 02, 2009 5:58 pm
Location: DFW, TX USA

Re: Registrations

Postby axel971 » Wed Mar 21, 2018 7:55 pm

Thanks a lot to both of you :)
axel971
Member
 
Posts: 10
Joined: Mon Jan 15, 2018 7:37 am

Re: Registrations

Postby mdyde » Thu Mar 22, 2018 5:01 am

Thanks, Axel.

You're very welcome.
Best regards,
Martin.

[Please use email or the Contact page if you need to contact us privately, rather than private forum messages.]

Image
User avatar
mdyde
Moderator
 
Posts: 10644
Joined: Fri Mar 14, 2003 2:19 pm
Location: UK


Return to Technical support

Who is online

Users browsing this forum: No registered users and 1 guest