Hello All,
Has the programming protocol somehow changed with Hauptwerk version 4.0 and/or 4.1 over version 3?
In the past, I was able to program stop changes via midi in Digital Performer using Hauptwerk's "Stop/Coupler/tremulant switches & pistons/buttons" window under the 'Organ Settings' tab. This function seems not to work in any sample set from any sample library provider, including the St. Annes Moseley organ.
Has something changed?
For example, if I wanted to program St. Annes' Pedal Open Diapason 16' stop to turn on via Midi Channel #8, it was a simple matter of going to the Stop/Coupler ... window under the Organ Settings tab, selecting the following options:
Input: "Stop or hold- piston: MIDI on/off";
Midi IN Port: "Any Enabled Port";
MIDI Channel: Channel 8 (dec 07, hex 07)
('On') Note: (in this example) 060 (hex 3C): Oct 3, note C (middle C)
Then, in Digital Performer, when I would invoke Note Middle C in Channel 8, the Open Diapason 16' Pedal stop would work, either using IAC-8 or Hauptwerk AU link set to channel 8.
* * * * *
Alas, none of this programability seems to be working now.
What am I doing wrong? What SHOULD I be doing to invoke any stop in any Organ Division (Pedal Stops in Midi channel 8, Manual I stops in Midi channel 9, Manual II stops in Midi Channel 10, etc.
Any insight would be welcomed. Any insights, Martin?
Cheers,
Joe
Has the programming protocol somehow changed with Hauptwerk version 4.0 and/or 4.1 over version 3?
In the past, I was able to program stop changes via midi in Digital Performer using Hauptwerk's "Stop/Coupler/tremulant switches & pistons/buttons" window under the 'Organ Settings' tab. This function seems not to work in any sample set from any sample library provider, including the St. Annes Moseley organ.
Has something changed?
For example, if I wanted to program St. Annes' Pedal Open Diapason 16' stop to turn on via Midi Channel #8, it was a simple matter of going to the Stop/Coupler ... window under the Organ Settings tab, selecting the following options:
Input: "Stop or hold- piston: MIDI on/off";
Midi IN Port: "Any Enabled Port";
MIDI Channel: Channel 8 (dec 07, hex 07)
('On') Note: (in this example) 060 (hex 3C): Oct 3, note C (middle C)
Then, in Digital Performer, when I would invoke Note Middle C in Channel 8, the Open Diapason 16' Pedal stop would work, either using IAC-8 or Hauptwerk AU link set to channel 8.
* * * * *
Alas, none of this programability seems to be working now.
What am I doing wrong? What SHOULD I be doing to invoke any stop in any Organ Division (Pedal Stops in Midi channel 8, Manual I stops in Midi channel 9, Manual II stops in Midi Channel 10, etc.
Any insight would be welcomed. Any insights, Martin?
Cheers,
Joe
Last edited by jcfelice88keys on Fri Mar 30, 2018 6:17 pm, edited 2 times in total.