It is currently Thu Mar 28, 2024 7:43 am


Real and virtual pistons

Hauptwerk software technical support only. Please make sure you have read the manual, tutorials and FAQ pages before requesting support.
  • Author
  • Message
Offline

Arp

Member

  • Posts: 83
  • Joined: Fri Mar 19, 2010 5:24 pm

Real and virtual pistons

PostMon Apr 23, 2018 2:56 am

I open a new topic because I did not find the topic in the forum.
How to map two real pistons on a virtual one.
I would like to map the virtual sequencer piston with a foot piston and a thumb piston at the same time.
I tried but it does not seem possible.
Regards
Offline

GrahamH

Member

  • Posts: 618
  • Joined: Tue Sep 09, 2008 6:39 am
  • Location: Near Manchester, England

Re: Real and virtual pistons

PostMon Apr 23, 2018 3:36 am

How to map two real pistons on a virtual one.

1. Right click on virtual piston
2. Select "Adjust MIDI/trigger settings manually ..."
3. Under "Primary input" tab, click on "Auto detect settings" button and auto-detect real foot piston
4. Under "Input 2" tab, click on "Auto detect settings" button and auto-detect real thumb piston

Hope this helps

Graham
Offline

Arp

Member

  • Posts: 83
  • Joined: Fri Mar 19, 2010 5:24 pm

Re: Real and virtual pistons

PostSun Apr 29, 2018 7:43 am

GrahamH wrote:
How to map two real pistons on a virtual one.

1. Right click on virtual piston
2. Select "Adjust MIDI/trigger settings manually ..."
3. Under "Primary input" tab, click on "Auto detect settings" button and auto-detect real foot piston
4. Under "Input 2" tab, click on "Auto detect settings" button and auto-detect real thumb piston

Hope this helps

Graham


Thanks, Graham!

Return to Technical support

Who is online

Users browsing this forum: No registered users and 4 guests