Submit Search

How to fix - everything is coupled

Hauptwerk software technical support only. Please make sure you have read the manual, tutorials and FAQ pages before requesting support.

How to fix - everything is coupled

Postby LenS » Wed Sep 26, 2018 5:41 am

Hello all,
We have hauptwerk running on an old Johannus console for a couple of years now.
Some weeks ago it suddenly happened that the pedal board is coupled to both keyboards and the bottom keyboard is coupled to the top keyboard. This happened even though the couplers (pedal to keyboard and great to swell) are not engaged.
I reloaded the organ - same problem.
I loaded another organ - same problem.
I then restored an earlier backup - same problem.

Any suggestions? Is it likely software related or hardware?
And why would this suddenly rear its head when it has been working fine for quite some time.
Posts: 8
Joined: Mon May 05, 2014 3:07 am

Re: How to fix - everything is coupled

Postby IainStinson » Wed Sep 26, 2018 6:46 am

I suggest checking that each "manual" is (still) sending on a distinct midi channel. The encoder in the console may have changed its settings (for some reason) or developed a fault.

You can use the HW midi logging or another program (for example MidiMedi (on a PC) or Midiox on a PC or a MAC) to check this out.

User avatar
Posts: 755
Joined: Tue Dec 29, 2009 7:08 pm
Location: NW England, UK

Return to Technical support

Who is online

Users browsing this forum: No registered users and 2 guests