It is currently Sat Feb 22, 2020 10:14 pm


set stepper # via midi

Hauptwerk software technical support only. Please make sure you have read the manual, tutorials and FAQ pages before requesting support.
  • Author
  • Message
Offline

grtmd

Member

  • Posts: 2
  • Joined: Tue Feb 28, 2017 10:54 am

set stepper # via midi

PostFri May 03, 2019 3:45 pm

Is there midi implementation for setting a stepper registration number such as 146, 241,etc? This can be accomplished by repetitive midi messages to the appropriate piston on the primary piston tool bar, for example, 100+ once, 10+ 4 times to get 140, then xx6 to finally arrive at 146. There should be a simpler way. Thanks
Offline

josq

Member

  • Posts: 781
  • Joined: Tue Jan 24, 2012 1:11 pm

Re: set stepper # via midi

PostFri May 03, 2019 4:05 pm

Yes there is. Go to organ settings - midi / key triggers..., expand the list, and look at the end of the list for the cue options
Offline

grtmd

Member

  • Posts: 2
  • Joined: Tue Feb 28, 2017 10:54 am

Re: set stepper # via midi

PostFri May 03, 2019 8:20 pm

Great! Called myself scouring the documentation, but totally missed this. Perfect solution. Thanks!!

Return to Technical support

Who is online

Users browsing this forum: No registered users and 4 guests