Search:
Submit Search


Freiberg wind model

Existing and forthcoming Hauptwerk instruments, recommendations, ...

Re: Freiberg wind model

Postby OrganoPleno » Tue Dec 11, 2018 11:32 am

Grant_Youngman wrote:Well … I'm fresh out of ideas …


Maybe a Fresh Re-Install would help.
OrganoPleno
Member
 
Posts: 387
Joined: Thu Dec 03, 2009 5:08 pm

Re: Freiberg wind model

Postby mnailor » Tue Dec 11, 2018 2:34 pm

I did that recently . Same behavior before and after.
mnailor
Member
 
Posts: 468
Joined: Sat Nov 30, 2013 6:57 pm
Location: Atlanta, GA

Re: Freiberg wind model

Postby Fokko » Tue Dec 11, 2018 5:46 pm

Hi all,

There is nothing wrong with the sampleset and/or with the installation of it. The wind behavior of a set like Freiberg and also Rotterdam Main organ is to be set "lively" as the maker wants it to behave like this. Jiri Zurek wrote about it, see under FEATURES and the text WIND MODEL:
http://www.sonusparadisi.cz/en/organs/n ... organ.html
So, if you do dislike the default-setting of the sampesetmaker you easily could turn the wind model feature of Hauptwerk off.

Hope it helps.

Fokko
Fokko Horst
Fokko
Member
 
Posts: 227
Joined: Sat Nov 11, 2006 7:48 am
Location: Zwolle Netherlands

Re: Freiberg wind model

Postby mnailor » Tue Dec 11, 2018 6:39 pm

Those remarks were specifically written about Rotterdam main, not other SP sets. Freiberg should be a reasonable model of the wind system on the organ.
mnailor
Member
 
Posts: 468
Joined: Sat Nov 30, 2013 6:57 pm
Location: Atlanta, GA

Re: Freiberg wind model

Postby Fokko » Wed Dec 12, 2018 4:01 am

Well, yes this text is specifically part of the Information and features webtext of Rotterdam Main organ but the underlying issue you described (windsack playing heavy chords on full plenum) does affect several samplesets of at least Sonus Paradisi, like also Zwolle, Menesterol and perhaps others.
The behaviour of the sound of a sampleset at this point, like f.e. Freiberg, has nothing to do with the original instrument and sound. It has all to do with modelling the sampleset itself by using the specific windmodel feature within Hauptwerk.

To set up a windmodel for a sampleset that sounds and comes closely to the instrument itself seems to be a huge challange. This has been discussed in other threads as well.
Fokko Horst
Fokko
Member
 
Posts: 227
Joined: Sat Nov 11, 2006 7:48 am
Location: Zwolle Netherlands

Re: Freiberg wind model

Postby mnailor » Wed Dec 12, 2018 11:02 am

I think you're right. I'm going to leave wind model enabled except for pieces where the wind sag gets unbearable, then temporarily disable it for those. Like the wind stabilizer cutout switch on Rosales...
mnailor
Member
 
Posts: 468
Joined: Sat Nov 30, 2013 6:57 pm
Location: Atlanta, GA

Re: Freiberg wind model

Postby Fokko » Wed Dec 12, 2018 4:39 pm

Enjoy it :)
Fokko Horst
Fokko
Member
 
Posts: 227
Joined: Sat Nov 11, 2006 7:48 am
Location: Zwolle Netherlands

Previous

Return to Hauptwerk instruments

Who is online

Users browsing this forum: No registered users and 2 guests