Hello Jim,
To clear all settings for an organ completely when un-installing it, you need to make sure that you:
- Un-install the entry prefixed with '
Organ: ...' (not just its '
Data: ...' components), *and*:
- Say 'yes' when then asked whether you'd like to delete the settings and combinations for the organ.
A 'cheating' way to achieve the same effect would be to load the organ via the '
Design tools | Load organ (with design options), with all the '
Reset ...' options ticked, as well as the '
Show rank audio/memory options/routing screen' option, but all of the other options un-ticked.
BaroqueDMX wrote:One major problem I'm having is that on the Hauptwerk division I'm only getting sound from the C# side of the organ.
I currently have all the standard stops going to Main, and Rear going to Surround, which doesn't play when I use the headphones.
My guess is that you have two logical audio outputs (on the '
General settings | Audio outputs | Routing ...' screen tab) in the same logical audio output group, and one of those audio outputs doesn't have device channels selected to which your amplifiers/speakers are actually connected.
However, that will affect all organs equally.
Best regards, Martin.
Hauptwerk software designer/developer, Milan Digital Audio.