I'm using the trial version (4.2.1) to verify that a new-to-me Rodgers 840 "Windsor" with optional MIDI will work with it's ancient implementation. I believe it uses Rodger's MIDI Phase II. I'm able to auto-learn all three manuals and expression pedals. The stop and piston implementation uses SYSEX. When I try to learn them, "Done" remains gray and un-selectable.
I've read through some old posts before Hauptwerk added Rodgers bitfield interpretation, e.g. viewtopic.php?f=4&t=5411 ; viewtopic.php?t=3123 ; http://www.organforum.com/forums/showth ... -Stop-tabs.
I'm having some difficulty implementing these manually. I understand I should select Rodgers pre-Infinity bitfield. I'm not going to use the Hauptwerk pistons. Here's a record of three stops as examples (all toggle):
First is Swell Bourdon Doux 16', second is Pedal Contra Principal 32', third is Choir/Positiv Erzaehler 8', and fourth is Great Principal 8'. I used MIDI-OX to capture this data. It can give me the results in decimal rather than hex if needed.
I've not found a clear walkthrough of how to use the Rodgers implementation. Pardon any of my ignorance. Your help is appreciated.
I've read through some old posts before Hauptwerk added Rodgers bitfield interpretation, e.g. viewtopic.php?f=4&t=5411 ; viewtopic.php?t=3123 ; http://www.organforum.com/forums/showth ... -Stop-tabs.
I'm having some difficulty implementing these manually. I understand I should select Rodgers pre-Infinity bitfield. I'm not going to use the Hauptwerk pistons. Here's a record of three stops as examples (all toggle):
- Code: Select all
TIMESTAMP IN PORT STATUS DATA1 DATA2 CHAN NOTE EVENT
0000EC06 1 -- F0 Buffer: 10 Bytes System Exclusive
SYSX: F0 7F 00 00 2D 7F 00 07 00 F7
0000F742 1 -- F0 Buffer: 10 Bytes System Exclusive
SYSX: F0 7F 00 00 2D 7F 00 15 00 F7
0000FF63 1 -- F0 Buffer: 10 Bytes System Exclusive
SYSX: F0 7F 00 00 2D 7F 00 0E 02 F7
0001058F 1 -- F0 Buffer: 10 Bytes System Exclusive
SYSX: F0 7F 00 00 2D 7F 00 00 08 F7
First is Swell Bourdon Doux 16', second is Pedal Contra Principal 32', third is Choir/Positiv Erzaehler 8', and fourth is Great Principal 8'. I used MIDI-OX to capture this data. It can give me the results in decimal rather than hex if needed.
I've not found a clear walkthrough of how to use the Rodgers implementation. Pardon any of my ignorance. Your help is appreciated.