Search:
Submit Search


Can't stop the stop noise

Sampling pipe organs and turning them into something you can play in Hauptwerk.

Can't stop the stop noise

Postby Mirch4 » Sun May 13, 2018 9:45 am

I am working on a new commercial sample set and am trying to add a 'stop noise on/off' switch to the sample set.

I have started by adding PercussiveEngagingSoundEffect_RankID (and the 3 others) to each stop in the CODM.

HW then generates an ODF with two extra StopRank entries per stop, looking like this:

Image

All is good and there is a 'clunk' as each stop is operated.

Now I change three fields in the StopRank entries to look like this:

Image

I had expected that stop 2504 (stop noise on/off) would change the behaviour when operating stops between 'clunk' and no clunk. In fact I now get no stop noise at all, whichever position 2504 is in.

I have checked that SwitchID 11353 is correct, by editing the ODF to make it do something else as well.

What am I missing?
Mirch4
Member
 
Posts: 2
Joined: Fri Mar 02, 2018 7:09 am

Re: Can't stop the stop noise

Postby Mirch4 » Mon May 14, 2018 7:27 am

Problem solved - the two ranks did not have samples for a matching set of note numbers. Now we can go from clunk to no clunk.
Mirch4
Member
 
Posts: 2
Joined: Fri Mar 02, 2018 7:09 am

Re: Can't stop the stop noise

Postby chr.schmitz » Mon May 14, 2018 11:57 am

Hello Mirch4,

Obviously, you did not see my private message. I had a slightly different solution for you. Anyhow, you made it -- with a very smart and unconventional use of the alternate rank.

Best,
Chris
User avatar
chr.schmitz
Member
 
Posts: 291
Joined: Mon Aug 26, 2013 12:49 am


Return to Creating sample sets / recording organs

Who is online

Users browsing this forum: No registered users and 0 guests