It is currently Thu Mar 28, 2024 11:46 pm


Midi boutique hwce2x bundle 1

Connecting Hauptwerk to MIDI organs, sequencers, ...
  • Author
  • Message
Offline

Citroenboi

Member

  • Posts: 18
  • Joined: Tue Aug 25, 2020 10:22 am

Midi boutique hwce2x bundle 1

PostMon Oct 26, 2020 10:26 am

Hi
I have Hwce2X bundle 1. I have linked all the ground connections on the key multiplexor boards. Is that it or do I need to also connect to the ground on the main encoder board?

Thanks Mark
Offline

larason2

Member

  • Posts: 752
  • Joined: Thu Feb 04, 2016 9:32 pm

Re: Midi boutique hwce2x bundle 1

PostMon Oct 26, 2020 8:42 pm

On the Keymux64 boards, a wire goes to the switch on each key, however the other end of the switch on each wire must go to the ground input on the board. You can have a common ground for each key switch, that is the point of using the Keymux64 boards rather than the SM8x8. Each Keymux64 board must also be wired from the appropriate connection (not the ground) to the PWR T connection on the main board, however, this is not the same as the ground. You can refer to the wiring diagram in the manual.

Return to Audio / MIDI interfacing

Who is online

Users browsing this forum: No registered users and 5 guests