It is currently Sun Feb 16, 2020 9:54 pm


External rank channel #

Using the CODM to create your own organ definitions, exchange CODM organ definitions, ...
  • Author
  • Message
Offline
User avatar

megafisc2

Member

  • Posts: 92
  • Joined: Wed Dec 31, 2008 10:49 am
  • Location: Erie, PA

External rank channel #

PostThu Feb 03, 2011 11:36 pm

Where do I set the MIDI channel # for external ranks? I have four external ranks. Each is a unit rank so each rank has its own decoder. I intend to have each decoder on a different MIDI channel. Is this set in the CODM or is this done in Hauptwerk after the organ is loaded?
Offline
User avatar

mdyde

Moderator

  • Posts: 11558
  • Joined: Fri Mar 14, 2003 2:19 pm
  • Location: UK

Re: External rank channel #

PostFri Feb 04, 2011 7:48 am

Hello Mark,

The latter - organ definitions are completely separate from MIDI settings.

In the current version of Hauptwerk (v3.30) the procedure is:

- Unload the organ if it's loaded.

- Insert an entry for each external rank on the 'General settings | MIDI output paths' screen, specifying the appropriate MIDI port and channel for each.

- Insert an entry for each on the 'General settings | Rank MIDI outputs' screen, selecting the corresponding MIDI path (port/channel).

- Load the organ.

- On the 'Organ settings | Connect organ ranks to rank MIDI outputs' screen select the corresponding rank output entry for each external rank.
Best regards, Martin.
Hauptwerk software designer/developer, Milan Digital Audio.

[Please use email or the Contact page if you need to contact us privately, rather than private forum messages.]
Offline
User avatar

megafisc2

Member

  • Posts: 92
  • Joined: Wed Dec 31, 2008 10:49 am
  • Location: Erie, PA

Re: External rank channel #

PostFri Feb 04, 2011 11:45 am

Martin - Thank you so much for your continued outstanding support!
Offline
User avatar

mdyde

Moderator

  • Posts: 11558
  • Joined: Fri Mar 14, 2003 2:19 pm
  • Location: UK

Re: External rank channel #

PostFri Feb 04, 2011 12:31 pm

Thanks, Mark. You're welcome.
Best regards, Martin.
Hauptwerk software designer/developer, Milan Digital Audio.

[Please use email or the Contact page if you need to contact us privately, rather than private forum messages.]

Return to Custom Organ Design Module (CODM)

Who is online

Users browsing this forum: No registered users and 1 guest