It is currently Fri Mar 29, 2024 2:24 am


Undulating sound

Using the CODM to create your own organ definitions, exchange CODM organ definitions, ...
  • Author
  • Message
Offline

mimusicguy

Member

  • Posts: 7
  • Joined: Fri Dec 18, 2009 2:48 pm

Undulating sound

PostFri Jan 24, 2020 3:31 pm

I loaded a custom organ into HW V, that seemed to work perfectly in HW 4.
What I notice now is that the ranks without the tremulant ON, still seem to have a slight trem to them, then it increases when the trem is turned on.

As this is my first CODM Cutom organ for HW V, is there a setting in the rank definitions that needs to change?

Thanks for any advice.
Offline

mimusicguy

Member

  • Posts: 7
  • Joined: Fri Dec 18, 2009 2:48 pm

ranks seem to have minor term when term is off

PostFri Jan 24, 2020 3:33 pm

I loaded a custom organ into HW V, that seemed to work perfectly in HW 4.
What I notice now is that the ranks without the tremulant ON, still seem to have a slight trem to them, then it increases when the trem is turned on.

As this is my first CODM Cutom organ for HW V, is there a setting in the rank definitions that needs to change?

Thanks for any advice.
Offline

smfrank

Member

  • Posts: 357
  • Joined: Sun Dec 20, 2009 9:53 am
  • Location: NY, NY

Re: Undulating sound

PostFri Jan 24, 2020 3:58 pm

Wind model turned on?
Steven Frank
Offline
User avatar

mdyde

Moderator

  • Posts: 15444
  • Joined: Fri Mar 14, 2003 1:19 pm
  • Location: UK

Re: Undulating sound

PostSat Jan 25, 2020 4:57 am

Hello mimusicguy,

I've merged your two topics together, since I see you posted the same question in two different sections of the forum. (Just for future reference, please try to post any given question in only one place, so that people don't end up needing to reply in duplicate, or unaware of others' replies -- many thanks.)

Yes -- to confirm smfrank's reply (thanks, smfrank), I'd suggest tweaking the wind supply model parameters in your CODM ODF.
Best regards, Martin.
Hauptwerk software designer/developer, Milan Digital Audio.
Offline

larason2

Member

  • Posts: 752
  • Joined: Thu Feb 04, 2016 9:32 pm

Re: Undulating sound

PostSat Feb 22, 2020 10:07 am

I had the same problem, except it happened only with the pedal stops, and only if I had more than one pedal stop selected. The solution was that I did not allocate enough virtual wind chest volume in the division settings. I would look there.

Return to Custom Organ Design Module (CODM)

Who is online

Users browsing this forum: No registered users and 3 guests

cron