Fri Dec 29, 2023 3:37 am
Thanks all. I decided I could spend a long time working out the serialisation, or just spend an hour patching it in to an arduino. So I chose the latter. I reused the original wiring and connector back to the console, so the arduino connects to my “master arduino” over serial, and gets 5v power down that connector.
Whilst I was there I replaced the 4x100k pots on the swell shoes with 10ks and got them up and running, so as a HW console, it’s now doing pretty well.
Next up, the stops/solenoids. Never done solenoids before, so that’s going to be interesting/challenging…
Adrian