Also, for the benefit of anybody reading this thread that might not already have found it, the full documentation for Hauptwerk v5's audio routing/mixer/reverb functionality is in the two '
Audio routing and impulse response reverb ...' chapters in the main Hauptwerk user guide (pages 166-201 in the current v5.0.0 version). Also, for those used to v4's routing functionality, the summary in the '
Changes in version 5.0.0 above version 4.2.1: Advanced Edition only: audio routing, multiple audio output perspectives, and associated voicing changes' section in the release notice (pages 5-8 in the v5.0.0 version) explains the changes and how the new routing functionality and terminology relates to those from v4:
https://www.hauptwerk.com/documentation/In the main Hauptwerk user guide's routing sections, '
Example 6: multi-channel audio with 24 (or more) speakers configured as stereo pairs in 3 groups of 4 pairs each, with different organ divisions routed to different groups, optionally plus a sub-woofer, optionally with an additional pair of ‘rear’ speakers for surround-sound, optionally with an additional pair of speakers as an ‘aux reverb mix’ with added reverb (which can be bypassed, or its wetness adjusted, on a per-organ basis)' (pages 196-201) gives an example of routing different divisions to different groups. (If you only want to use a single stereo pair of speakers for each division, then you would only want one mixer bus, i.e. speaker pair, in each of your groups/divisions).
Note also that if you simply want your existing v4 audio routing to be entirely unchanged from v4 (and you don't plan to take advantage of any of the new routing abilities that v5 offers), then when you first launch v5 just allow it to migrate your existing audio routing/settings, by making sure that that you
un-tick the '
Discard migrated Hauptwerk v4 audio settings and reset audio device settings' option on the General Configuration Wizard when it runs automatically upon first launch of v5. [If you have already launched v5 and reset the routing then note that you could potentially get (all of) your v4 settings back, including audio routing, by using '
File | Restore ...' in v5 to restore the last settings backup you made from 4, then re-launching v5, then un-ticking that '
Discard migrated Hauptwerk v4 audio settings and reset audio device settings' option when prompted.]
Best regards, Martin.
Hauptwerk software designer/developer, Milan Digital Audio.