Tue Jun 01, 2021 10:35 am
Hello Willi,
Ok, finally got the files and was able to review them.
I tested your configuration on my system (2 screens). With both configurations (before and after shuthdown), I get the same result (I have 2 screens).... the 3 windows are one over the other (the large/wide one being on top, the 2 smaller ones under the large one).
If I reorganize them (the large one on my main monitor and the 2 smaller one on my secondary monitor), exit Hauptwerk and re-start Hauptwerk, the positioning was saved and restored correctly. If I shutdown, power up and start Hauptwerk, same thing, all the screen are properly placed on my 2 monitors has they were before shutting down.
All of this was done using your Hauptwerk configurations. So on my system, all is fine and working correctly.
By any change, since you use 3 monitors, is it possible that you are using some screen management utility (some video cards has such utility allowing easy/rapid modification to the screens layout, resolution, orientation etc.). If so try to disable it and see if this fix your problem.
If you want you can send me our computer's System Info file.
To access your PC’s System Information on Windows 7 and Windows 10
1. Click Start > All Programs > Accessories > System Tools > System Information
2. IMPORTANT: Click File then "Save as", save this file as a .nfo file format and rename the file your name email it to me... I will have a good overview of your system and may find something.
Best regards
François
Virtually sharing my enthusiasm and experience with you
Worldwide technical assistance, consultation and ready to play system.http://www.HauptwerkConsultant.comAND
Hauptwerk Support Manager