Hi all,
I would appreciate any help with an audio problem.
I use HW 6 with RME hdsp9632 audio card. In HW I configured two simultaneous audio outputs through stereo analog channels and SPDIF in the RME card using Rank output perspectives 1 and 2 in the Rank routing in Organ settings. This worked absolutely fine until I got unresponsive Windows and had to reset the computer. Now I hear audio only from Rank output perspective 1 and nothing from Rank output perspective 2 (or 3 or 4). How can I make this configuration work again?
Below is the detailed audio configuration I have:
in General settings-Audio mixer: Mxr prst 1 prmry bus 1 uses channels 0001/0002 (analog stereo), Mxr prst 1 prmry bus 2 uses channels 0003/0004 (SPDIF);
in General settings-Audio mixer bus groups: Mxr prst 1 bus grp 0001 uses mixer bus 0001, Mxr prst 1 bus grp 0002 uses mixer bus 0002;
in Organ settings-Rank routing: Rank output perspective 1=0001, Rank output perspective 2=0002.
I have sound through SPDIF when I set Rank output perspective 1=0002, but not with Rank output perspective 2=0002.
I tried restoring HW settings from a recent backup - it did not help.
Thanks in advance,
Alexander.
I would appreciate any help with an audio problem.
I use HW 6 with RME hdsp9632 audio card. In HW I configured two simultaneous audio outputs through stereo analog channels and SPDIF in the RME card using Rank output perspectives 1 and 2 in the Rank routing in Organ settings. This worked absolutely fine until I got unresponsive Windows and had to reset the computer. Now I hear audio only from Rank output perspective 1 and nothing from Rank output perspective 2 (or 3 or 4). How can I make this configuration work again?
Below is the detailed audio configuration I have:
in General settings-Audio mixer: Mxr prst 1 prmry bus 1 uses channels 0001/0002 (analog stereo), Mxr prst 1 prmry bus 2 uses channels 0003/0004 (SPDIF);
in General settings-Audio mixer bus groups: Mxr prst 1 bus grp 0001 uses mixer bus 0001, Mxr prst 1 bus grp 0002 uses mixer bus 0002;
in Organ settings-Rank routing: Rank output perspective 1=0001, Rank output perspective 2=0002.
I have sound through SPDIF when I set Rank output perspective 1=0002, but not with Rank output perspective 2=0002.
I tried restoring HW settings from a recent backup - it did not help.
Thanks in advance,
Alexander.
Cogito ergo sum.