Hello Hauptwerk Experts,
I've configured a Motu 24ao as an audio device in Hauptwerk 7 and set up a two pairs of speakers as two separate mixer buses in the Audio Mixer window for mixer preset 1. I also created a mixer bus group and checked the two mixer buses created previously. Using the Rank Routing window, I routed all ranks to this mixer bus group. The mixer preset is set to "1".
I am getting red/green lights in the Rank Routing window when I draw stop(s) and play some notes. I also get red/green lights in the Audio Mixer Bus Groups window next to my mixer bus group mentioned above. (I'm using the St. Anne's sample set.)
I am not getting red/green lights in the Audio Mixer window (and no sound from my speakers either) next to the two mixer buses I've configured. I've reviewed the configurations several times, started from a complete reset Hauptwerk configuation a few times, rebooted the PC, etc. The setup seems straightforward -- I'm using "Example 4", for multi-channel audio, in the manual as that seems to be closest to what I hope to achieve, eventually.
Any ideas on what I'm missing? Thanks in advance!
I've configured a Motu 24ao as an audio device in Hauptwerk 7 and set up a two pairs of speakers as two separate mixer buses in the Audio Mixer window for mixer preset 1. I also created a mixer bus group and checked the two mixer buses created previously. Using the Rank Routing window, I routed all ranks to this mixer bus group. The mixer preset is set to "1".
I am getting red/green lights in the Rank Routing window when I draw stop(s) and play some notes. I also get red/green lights in the Audio Mixer Bus Groups window next to my mixer bus group mentioned above. (I'm using the St. Anne's sample set.)
I am not getting red/green lights in the Audio Mixer window (and no sound from my speakers either) next to the two mixer buses I've configured. I've reviewed the configurations several times, started from a complete reset Hauptwerk configuation a few times, rebooted the PC, etc. The setup seems straightforward -- I'm using "Example 4", for multi-channel audio, in the manual as that seems to be closest to what I hope to achieve, eventually.
Any ideas on what I'm missing? Thanks in advance!