OrganArt Media, Hauptwerk producer from the very beginning, is pleased to celebrate its 20th anniversary this year.
I discovered Martin Dyde and Hauptwerk-Software V1 on the Internet in 2002 after checking out the current technology of software samplers. There were previous attempts, e.g. with Native Instruments and the like, but none of them could meet the special requirements of organs, such as wind-model, playing aids, couplers, organ-specific graphical user interfaces, and a lot more.
At that time I knew immediately that this, not yet very comfortable software solution (at that time still from "Crumhorn Labs" , would be the future of the organ sampler and, above all, would allow a complete instrument to be mapped as a virtual organ and sound document.
The very first Hauptwerk V1 organs were the Griebenow Positif and the 1868 Mehmel organ, recorded in 2002, followed by the Reinhardtsgrimma Silbermann in 2003.
Listen to an old HW1 recording with the 1868 Mehmel organ:
R. Schumann, Organ transcription "Fast zu ernst"
Even from today's point of view, it's still amazing, how good HW1 already sounded!
OAM is happy to have done some pioneering work:
The world's first fully integrated Hauptwerk console with two touchscreens and three UHT keyboards was presented at the 2006 Frankfurt Music Fair. The organ builder-quality solid wood case contained computer and controls (such as mouse, keyboard, etc.) as well as swells, pistons and combinations (designed specifically for the HW2 Ducroquet CColl set at that time) became a model for many consoles made by later manufacturers. Two Genelec™ near-field monitors with a subwoofer produced an impressive spatial impression. Additionally headphones were provided for the visitors
The R&M/OrganArt-Media booth at Frankfurt Music Fair 2006
The integrated R&M organ console at Frankfurt Music Fair 2006
On the left, you can see specially made interchangeable pedals for historical French and Italian organs
The world-renowned organists Barbara Dennerlein and Hector Olivera, who have been working with Hauptwerk ever since, were particularly enthusiastic and impressed by Hauptwerk and its possibilities at the fair.
Jazz organist Barbara Dennerlein at the Music Fair 2005
Picture: Courtesy of B. Dennerlein
Hector Olivera at the R&M organ console playing the Ducroquet-CColl set at the Music Fair 2006
Picture: Courtesy of H. Olivera
The multi-level, multi-release technique made now possible by HW3, was introduced and first used with the Ducroquet-CColl.
A first instrument with native partially sampled tremulants was realized with the Trost organ Waltershausen, later the Silbermann-Metzler, Arlesheim, the latter now with complete sampled tremulants.
As we all know, Hauptwerk, later under the new owner Milan Digital Audio, has evolved over the years up to version 7 and today, with increasingly sophisticated features, allows a sound reality that was really unthinkable years ago.
Meanwhile, 25 OAM stereo and surround organ sets with historical importance are available. The most recent one, the OAM "Opus summum" after 20 years experience, will be Ottobeuren's great Trinity organ, which will be published soon.
Now listen to today's incredible sound quality of a HW7 set (Riepp, Ottobeuren, Dreifaltigkeits Organ)
D. Buxtehude, Komm heiliger Geist, Herre Gott
This is now also the place to thank the brilliant developer, Martin Dyde, who created this software with his exceptional software skills (I've never had a Hauptwerk crash!), coupled with his in-depth knowledge of organ building (just think of that wind model…).
Also a big thanks to all faithful OAM customers who have always been a motivation during 20 years
Special Anniversary Sales:
To celebrate with you, all OAM sets are offered with a 20% discount from 1st to 31st October 2022
I discovered Martin Dyde and Hauptwerk-Software V1 on the Internet in 2002 after checking out the current technology of software samplers. There were previous attempts, e.g. with Native Instruments and the like, but none of them could meet the special requirements of organs, such as wind-model, playing aids, couplers, organ-specific graphical user interfaces, and a lot more.
At that time I knew immediately that this, not yet very comfortable software solution (at that time still from "Crumhorn Labs" , would be the future of the organ sampler and, above all, would allow a complete instrument to be mapped as a virtual organ and sound document.
The very first Hauptwerk V1 organs were the Griebenow Positif and the 1868 Mehmel organ, recorded in 2002, followed by the Reinhardtsgrimma Silbermann in 2003.
Listen to an old HW1 recording with the 1868 Mehmel organ:
R. Schumann, Organ transcription "Fast zu ernst"
Even from today's point of view, it's still amazing, how good HW1 already sounded!
OAM is happy to have done some pioneering work:
The world's first fully integrated Hauptwerk console with two touchscreens and three UHT keyboards was presented at the 2006 Frankfurt Music Fair. The organ builder-quality solid wood case contained computer and controls (such as mouse, keyboard, etc.) as well as swells, pistons and combinations (designed specifically for the HW2 Ducroquet CColl set at that time) became a model for many consoles made by later manufacturers. Two Genelec™ near-field monitors with a subwoofer produced an impressive spatial impression. Additionally headphones were provided for the visitors
The R&M/OrganArt-Media booth at Frankfurt Music Fair 2006
The integrated R&M organ console at Frankfurt Music Fair 2006
On the left, you can see specially made interchangeable pedals for historical French and Italian organs
The world-renowned organists Barbara Dennerlein and Hector Olivera, who have been working with Hauptwerk ever since, were particularly enthusiastic and impressed by Hauptwerk and its possibilities at the fair.
Jazz organist Barbara Dennerlein at the Music Fair 2005
Picture: Courtesy of B. Dennerlein
Hector Olivera at the R&M organ console playing the Ducroquet-CColl set at the Music Fair 2006
Picture: Courtesy of H. Olivera
The multi-level, multi-release technique made now possible by HW3, was introduced and first used with the Ducroquet-CColl.
A first instrument with native partially sampled tremulants was realized with the Trost organ Waltershausen, later the Silbermann-Metzler, Arlesheim, the latter now with complete sampled tremulants.
As we all know, Hauptwerk, later under the new owner Milan Digital Audio, has evolved over the years up to version 7 and today, with increasingly sophisticated features, allows a sound reality that was really unthinkable years ago.
Meanwhile, 25 OAM stereo and surround organ sets with historical importance are available. The most recent one, the OAM "Opus summum" after 20 years experience, will be Ottobeuren's great Trinity organ, which will be published soon.
Now listen to today's incredible sound quality of a HW7 set (Riepp, Ottobeuren, Dreifaltigkeits Organ)
D. Buxtehude, Komm heiliger Geist, Herre Gott
This is now also the place to thank the brilliant developer, Martin Dyde, who created this software with his exceptional software skills (I've never had a Hauptwerk crash!), coupled with his in-depth knowledge of organ building (just think of that wind model…).
Also a big thanks to all faithful OAM customers who have always been a motivation during 20 years
Special Anniversary Sales:
To celebrate with you, all OAM sets are offered with a 20% discount from 1st to 31st October 2022
Last edited by OAM on Mon Sep 26, 2022 4:13 am, edited 1 time in total.
Prof. Helmut Maier
OrganArt Media Sound Engineering
D-88662 Überlingen/Lake Constance
http://www.organartmedia.com
OrganArt Media Sound Engineering
D-88662 Überlingen/Lake Constance
http://www.organartmedia.com