Touch screen question

Buying or building computers for Hauptwerk, recommendations, troubleshooting computer hardware issues.
Post Reply
sclg
Member
Posts: 120
Joined: Wed Jul 08, 2009 3:22 pm

Touch screen question

Post by sclg »

(Apologies if there is a better forum for this)
I've just replaced my VERY old Iiyama touchscreens with two nice new Viewsonic TD2230.
Touching monitor 1 works fine. Touching monitor 2 appears/activates on monitor 1.

My old monitors had some driver software but it doesn't recognise the new screens. Do a need a driver from somewhere or should W11 manage this by itself? If so, how?!

Many thanks for any assistance.
Steve
User avatar
mdyde
Moderator
Posts: 15696
Joined: Fri Mar 14, 2003 1:19 pm

Re: Touch screen question

Post by mdyde »

[I'll move this topic to the "Computer hardware / specs" section of the forum once you've had a chance to read this reply.]
Best regards, Martin.
Hauptwerk software designer/developer, Milan Digital Audio.
mnailor
Member
Posts: 1721
Joined: Sat Nov 30, 2013 5:57 pm

Re: Touch screen question

Post by mnailor »

If both monitors appear in Settings / Displays / Multiple displays, you might not need a new driver.

Are the USB cables from both monitors plugged into the computer? Does Device Manager show two touchscreen devices? (You can check for a driver update there.)

Does Control Panel / Tablet PC Settings / Calibrate ... let you calibrate both touchscreens?

Here's one of many articles you can get ideas from, but I'd look for the owner's manual for your monitors first.

https://windowsreport.com/windows-11-ca ... t-working/
sclg
Member
Posts: 120
Joined: Wed Jul 08, 2009 3:22 pm

Re: Touch screen question

Post by sclg »

Thank you!
All it needed was setting up in the Tablet PC settings.
I'd searched in 'Settings' for 'Touch' and found nothing. Good old MS hiding it away!
Steve
User avatar
mdyde
Moderator
Posts: 15696
Joined: Fri Mar 14, 2003 1:19 pm

Re: Touch screen question

Post by mdyde »

[Topic moved here.]
Best regards, Martin.
Hauptwerk software designer/developer, Milan Digital Audio.
sclg
Member
Posts: 120
Joined: Wed Jul 08, 2009 3:22 pm

Re: Touch screen question

Post by sclg »

Just out of interest, turned it all on today and Windows had decided to switch both monitors back to landscape mode and lost all the touch settings!
It's not even connected to the internet so I can't blame an update!
Had to reset screens & touch from scratch....
Steve
Post Reply