Hi
I just upgraded to HW8 a few days ago (advanced version). The great news is that the MIni MK3 Launchpad installed without any difficulty.
The problem I am having is that when I assign a stop in a sample set to a button on the launchpad, that works, but I am not prompted to set the color of the button on the Launchpad. And thus my launchpad never is lit, and never shows the stops I have selected. Have I failed to configure something in Hauptwerk?
I am assigning stops to the launchpad by right clicking on the sampleset stop, using autodetect, and pressing a button on launchpad.
Thanks for any suggestions.
Nicholas Good
Organist / Choir Director
Christ Church Anglican
Overland Park, KS
Hauptwerk 8 and Novation Lauchpad MK3 Mini
Re: Hauptwerk 8 and Novation Lauchpad MK3 Mini
Did you follow the directions on page 274 of the HW 8 Installation and User Guide, including setting the output port?
"On Windows: on the "MIDI IN ports" screen tab: "MIDIIN2 (LPX MIDI)" (N.B. not "LPX MIDI"), and also:
On Windows: on the "MIDI OUT ports" screen tab: "MIDIOUT2 (LPX MIDI)" (N.B not "LPX MIDI")."
It works with my Mini mk3 on Windows 11.
"On Windows: on the "MIDI IN ports" screen tab: "MIDIIN2 (LPX MIDI)" (N.B. not "LPX MIDI"), and also:
On Windows: on the "MIDI OUT ports" screen tab: "MIDIOUT2 (LPX MIDI)" (N.B not "LPX MIDI")."
It works with my Mini mk3 on Windows 11.
Re: Hauptwerk 8 and Novation Lauchpad MK3 Mini
Thanks for pointing me to this section of the user manual.
I'll confirm that this is how I have it set up when I am at the church tomorrow.
I running HW on macOS, so will following that spec.
I'll confirm that this is how I have it set up when I am at the church tomorrow.
I running HW on macOS, so will following that spec.